Wednesday 1 January 2014

WINDOWS 7 HACK TIPS

Have you forgotten your windows login password? or want to access Admin account in school or colleges? 
Whatever the reason is, this article can help you to get into the Admin account of your Windows computer system even without knowing its password. 

For this purpose we will use here a small utility called "Offline Windows Password & Registry Editor".  

Offline Windows Password & Registry Editor
  • This is a utility to reset the password of any user of your Windows system.
  • Supports all Windows from NT3.5 to Win7, also 64 bit and also the Server versions (like 2003 and 2008)
  • You do not need to know the old password to set a new one.
  • It works offline, that is, you have to shutdown your computer and boot off a CD or USB disk to do the password reset.


Requirements:
  • Blank CD / USB Drive


Follow the procedure below to reset/remove password

1. Preparing a bootable  "Offline Windows Password & Registry Editor"  CD/USB
  • For CD: 
    1. Download this utility from here. You will get a zip file > extract it. 
    2. In the extracted folder you will get an iso image file named 'cd110511.iso'. Using any image burning software burn it on a blank CD.
  • For USB:
    1. Download  this utility from here. You will get a zip file > extract it. 
    2. Copy everything what is there in extracted folder and paste in your USB drive.
    3. Now open command prompt as administrator(write cmd in search at start menu >  right click on cmd.exe > run as administrator).
    4. In the command prompt write the following and press enter. 
      • f:\syslinux.exe -ma f:
      • Note: In above command, replace both f (marked red)with your USB drive's letter.


Now, your CD/USB is ready for use. You can now proceed with this media to the computer of which password you want to reset.

2. Resetting Password Using Bootable CD/USB
  1. Insert CD/USB in the computer whose password to be reset.
  2. Now you need to boot your system from  CD/USB. For that restart your computer, then if it ask automatically to boot from CD then press enter. If it does not ask automatically then after restarting your system, when you see the logo of your computer manufacturer, press esc or F10 just after that. It will take you to boot device option screen, select the USB and press enter.


  1. After booting from USB, first it will stop at the screen as shown below > press enter.



  2. Now, it will ask you to for the drive in which your windows is installed. Check the options thoroughly, and choose the correct one.(note: You can recognize it by the size of your drives)



  3. Now, it will ask you for the path of registry, write down the following:
    • windows/system32/config



  4. Then in next two stops write 1 and press enter.





  5. Then it  shows you all the user account on your windows system, write down the name of the user whose password you want to remove.



  6. In next step, write 1 if you want to remove password or write 2 if you want to reset.



  7. When you are done with password resetting or removing press '!' to get out of this, then press 'q'.





  8. Important Step: When it ask you to save back press 'y'. 


    1. In next stops, press 'n' then press ctrl+ alt+ delete, it will take you out from this, and will restart your computer. 









    Did you forget your windows login password? or want to access Admin account in school or colleges? 
    Whatever the reason is, this article can help you to get into the Admin account of your Windows computer system even without knowing its password. 

    For this purpose we will use here a small utility called "Offline Windows Password & Registry Editor".  

    Offline Windows Password & Registry Editor
    • This is a utility to reset the password of any user of your Windows system.
    • Supports all Windows from NT3.5 to Win7, also 64 bit and also the Server versions (like 2003 and 2008)
    • You do not need to know the old password to set a new one.
    • It works offline, that is, you have to shutdown your computer and boot off a CD or USB disk to do the password reset.


    Requirements:
    • Blank CD / USB Drive


    Follow the procedure below to reset/remove password

    1. Preparing a bootable  "Offline Windows Password & Registry Editor"  CD/USB
    • For CD: 
      1. Download this utility from here. You will get a zip file > extract it. 
      2. In the extracted folder you will get an iso image file named 'cd110511.iso'. Using any image burning software burn it on a blank CD.
    • For USB:
      1. Download  this utility from here. You will get a zip file > extract it. 
      2. Copy everything what is there in extracted folder and paste in your USB drive.
      3. Now open command prompt as administrator(write cmd in search at start menu >  right click on cmd.exe > run as administrator).
      4. In the command prompt write the following and press enter. 
        • f:\syslinux.exe -ma f:
        • Note: In above command, replace both f (marked red)with your USB drive's letter.


    Now, your CD/USB is ready for use. You can now proceed with this media to the computer of which password you want to reset.

    2. Resetting Password Using Bootable CD/USB
    1. Insert CD/USB in the computer whose password to be reset.
    2. Now you need to boot your system from  CD/USB. For that restart your computer, then if it ask automatically to boot from CD then press enter. If it does not ask automatically then after restarting your system, when you see the logo of your computer manufacturer, press esc or F10 just after that. It will take you to boot device option screen, select the USB and press enter.

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjd7-iIgbZWOAnz2sebSHGnPzsLmb-OFQfDlNlPXnEIyLEA1Si5LUTpMJxTDAQnBjIIVyyWyrp1uztkBxDUKDl2khDp1sg31OnSpueeBR1nnfn69ev4sAdhpEMeJ3wReZX0YGFVZ9nOHyy3/s640/2012-02-28_172526.png
    1. After booting from USB, first it will stop at the screen as shown below > press enter.

    1. Now, it will ask you to for the drive in which your windows is installed. Check the options thoroughly, and choose the correct one.(note: You can recognize it by the size of your drives)

    1. Now, it will ask you for the path of registry, write down the following:
      • windows/system32/config

    1. Then in next two stops write 1 and press enter.

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgnzPKgHW9Pi3tQlOPza-WY67u-CVk_iirjuj1eVNVWNbc4xw602hFjIJMPqamtOf8y6bbT_v2bgmJlT9ClkMCuKa2vUmQWEqPcthWBjeINx-tcWdNATiQT9q95G5EjCGH02_w1b6RwOAJB/s640/2012-02-28_173118.png

    Description: http://3.bp.blogspot.com/-cJAiMBwxlZ0/T00Da_AEWrI/AAAAAAAABdE/k-ajjmsvOw4/s640/2012-02-28_173053.png
    1. Then it  shows you all the user account on your windows system, write down the name of the user whose password you want to remove.

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgMehJQbYgtNKhsUHGXW9_aIjDdWbmX6hOqAqEfyFsz0bA1eRsLODXsbEWO8I6B1bTPUeCPoIrt6yFu7xpQ-jvsU8cvpUOJP6Kv8CKq_gjHmwouLzipBydyBKMACRZhWe5UkAA3NbnE06hb/s640/2012-02-28_173148.png
    1. In next step, write 1 if you want to remove password or write 2 if you want to reset.

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiNF3f4vzDwwoiqaObce6h50JOL6JzNl1xCbUE5mpiBLHtgpM0VZt1jX2DXpCtt4bUPmiBkHLPnaWxIaG0bWuOWGLhcup8qqrm-up2Tgw_91cbRUSqEncvRH9DX0za1SJ0bCU4TtSlBrnsR/s640/2012-02-28_173212.png
    1. When you are done with password resetting or removing press '!' to get out of this, then press 'q'.

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjpeLA_cI1AFH0YoddEHkTIGxjmbxGT0FnY7TSky04xDfs7tyvFsngKZA9uNVTv_19_gYDbFf8-38CrWAzHLvSzHM_ezmAYH00CQUFOUDKAi7RJzK5FGhZpWOTKP8N1yD2jghw5p_AfEW6_/s640/2012-02-28_173412.png

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhlmCFbB94RpbVwDdnQ8ofuw-5et3EbW_yi2bhZcce5-h9mJcVEtWn14xppT8Im_ooQ7P2-wmKGCVI0h759AO8Ppu3epWdUZCrcGDSscg7mivQolRMblYBQgHDrFSwrljcWNQrEIwUwJ4Op/s640/2012-02-28_173241.png
    1. Important Step: When it ask you to save back press 'y'. 

    Description: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjeLY6pSA_HyX67g37Z7J9VEVTME6qQgZ9GF5QZTcHg1KiFeE29gn1Tuisa6B9LmbGncerG9vuhh1sNLuUhTXO-9G0fiTW5LUYbLRhQRbxOiVbHYkJHJz3jdRaWkGeRE-PTDAMhjHCMzhaC/s640/2012-02-28_173320.png

    1. In next stops, press 'n' then press ctrl+ alt+ delete, it will take you out from this, and will restart your computer. 
    Description: http://2.bp.blogspot.com/-qqsCS-l9RzQ/T00Dm9X5DwI/AAAAAAAABeA/ZDsn88vk7ls/s640/2012-02-28_173459.png


    FORMATTING HP 650 PROBLEM

    HP 650 do come  with  windows 8. So, when you want to change to lower windows like windows 7, the laptop wont recognize your bootable disc. this thing happened to me. and i have found the solution.
    -- this issue has nothing to do with Windows 8;  or most likely not even the CD -- it is due to the UEFI setting of the system.  
    SOLUTION.
    1. Power on your laptop, press the button that will take you to the bios settings. so change the boot option  to use legacy boot options ..
    2. Also, dissable secure boot option.  then the CD will boot just fine.

    ***Be mindful to backup your files prior to trying this. Use an external case and save everything into another hard drive**  Because,  windows will not save 
    your files for you.








    There are different metods use here.
    Method #1:
    1. Boot up to installation DVD/CD.
    2. Click install but don't follow through.
    3. Press SHIFT-F10 to bring up console.
    4. Type "diskpart"
    5. Once inside diskpart type:
      -> list disk (find the one you want to convert)
      -> select disk 0 (select the one you want from the list)
      -> convert mbr (should take a second or two)
      -> quit
    6. Continue with install

    Method #2:
    1. Boot up to installation DVD/CD.
    2. Click install but don't follow through.
    3. Press SHIFT-F10 to bring up console.
    4. Type "diskpart"
    5. Once inside diskpart type:
      -> list disk (find the one you want to convert)
      -> select disk 0 (select the one you want from the list)
      -> clean (wait an hour or so until its done)
      -> quit

    6. Continue with install

    Please make comments to know if you have a challenged